Managing N-MFP Entity Assignments and Fund/Class Setup

Various user interfaces (pages) within Arc Suite allow you to view and edit the values of data points that have been loaded into the database and/or mapped in the output settings for portfolio and financial statements.

The information in the tables below serves as a cross reference between data points that are loaded and/or mapped and the respective user interfaces that allow for viewing/editing of the data point values. The tables also denote which data points are shared by ArcFiling and ArcReporting and demonstrate if the data points are referenced differently between the two products.

• Fund Data Points (click to see table)

  Fund Data Point Name	ArcReporting User Interface	ArcFiling User Interface	Environment Administration User Interface
  7-day gross yield (as of the month end)	Reporting Workspace > Financials > Financial Workbook > Fund Data Points tab > 7-day Gross Yield	Filings Workspace > N-MFP > Fund Information > Item A.19 - 7-day gross yield (as of the month end)	(ArcFiling or ArcReporting)
  Abbreviation	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Fund Information tab > Abbreviation
  CIK	(Environment Administration)	Filings Workspace > N-MFP > Part A: Fund/Class Setup > CIK Number of Registrant	Environment Administration > Settings > Funds > Fund > CIK
  Close Date	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Fund Information tab > Close Date
  Currency Code	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Fund Information tab > Currency Code
  Dollar Weighted Average Life	Reporting Workspace > Financials > Financial Workbook > Fund Data Points tab > Dollar Weighted Average Life	Filings Workspace > N-MFP > Fund Information > Item A.12 - Dollar Weighted Average Life	(ArcFiling or ArcReporting)
  Dollar Weighted Average Maturity	Reporting Workspace > Financials > Financial Workbook > Fund Data Points tab > Dollar Weighted Average Maturity	Filings Workspace > N-MFP > Fund Information > Item A.11 - Dollar Weighted Average Maturity	(ArcFiling or ArcReporting)
  EDGAR Series Identifier	(Environment Administration)	Filings Workspace > N-MFP > Part A: Fund/Class Setup > EDGAR Series Identifier	Environment Administration > Settings > Funds > Fund > EDGAR Series Identifier
  Fund Code	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Fund Code
  Fund Display Name 1	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Fund Display Name 1
  Fund Display Name 2	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Fund Display Name 2
  Fund Legal Name	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Fund Legal Name
  Fund Name	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Fund Name
  Inception Date	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Fund Information tab > Inception Date
  Legal Entity	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Legal Entity
  Net value of other assets	Reporting Workspace > Financials > Financial Workbook > Fund Data Points tab > Value of Other Assets	Filings Workspace > N-MFP > Fund Information > Item A.14.c	(ArcFiling or ArcReporting)
  Net value of other liabilities	Reporting Workspace > Financials > Financial Workbook > Fund Data Points tab > Value of Other Liabilities	Filings Workspace > N-MFP > Fund Information > Item A.15	(ArcFiling or ArcReporting)
  Net value of the series	Reporting Workspace > Financials > Financial Workbook > Fund Data Points tab > Net Assets	Filings Workspace > N-MFP > Fund Information > Item A.16	(ArcFiling or ArcReporting)
  N-MFP Category	(ArcFiling)	Filings Workspace > N-MFP > Part A: Fund/Class Setup > Item A.10 - Category	(ArcFiling)
  Securities Act File Number	(Environment Administration)	Filings Workspace > N-MFP > Part A: Fund/Class Setup > Item A.1 - Securities Act File Number	Environment Administration > Settings > Funds > Fund > Filings Info > Securities Act File Number
  Total value of portfolio securities at amortized cost	Reporting Workspace > Financials > Financial Workbook > Fund Data Points tab > Value of Total Investments	Filings Workspace > N-MFP > Fund Information > Item A.14.b.i	(ArcFiling or ArcReporting)

• Class Data Points (click to see table)

  Class Data Point Name	ArcReporting User Interface	ArcFiling User Interface	Environment Administration User Interface
  1 Year Expense Ratio	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > 1 Year Expense Ratio	(ArcReporting)	(ArcReporting)
  6 Month Expense Ratio	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > 6 Month Expense Ratio	(ArcReporting)	(ArcReporting)
  7-day net yield (shown as %)	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > 7-day net yield (Show as %)	Filings Workspace > N-MFP > Class Information > Item B.7 - 7-day net yield (show as %)	(ArcFiling or ArcReporting)
  Average Net Assets - 1 Year	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Average Net Assets - 1 Year	(ArcReporting)	(ArcReporting)
  Average Net Assets - 6 Months	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Average Net Assets - 6 Months	(ArcReporting)	(ArcReporting)
  Base Class	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Base Classes > Base Class Name
  Class Display Name 1	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Class Display Name 1
  Class Display Name 2	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Class Display Name 2
  Class Name	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Class Name
  CUSIP	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > CUSIP
  Description	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Description
  Distributions in Excess of Net Investment Income	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Distributions in Excess of Net Investment Income	(ArcReporting)	(ArcReporting)
  Dividends Reinvested	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Dividends Reinvested	(ArcReporting)	(ArcReporting)
  Dividends Reinvested - Shares	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Dividends Reinvested - Shares	(ArcReporting)	(ArcReporting)
  EDGAR Class Identifier	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > EDGAR Class Identifier
  Expense Cap Percentage	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Expense Cap Percentage
  Gross Redemptions	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Gross Redemptions	Filings Workspace > N-MFP > Class Information > Item B.6.f.ii - Gross Redemptions	(ArcFiling or ArcReporting)
  Gross Subscriptions (Including dividend reinvest)	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Gross Subscriptions (Including dividend reinvest)	Filings Workspace > N-MFP > Class Information > Item B.6.f.i - Gross Subscriptions (Including dividend reinvest)	(ArcFiling or ArcReporting)
  Inception Date	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Inception Date
  Load Code	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Load Code(s)
  Maximum Back End Load	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Maximum Back End Load
  Maximum Front End Load	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Maximum Front End Load
  Minimum Initial Investment	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Minimum Initial Investment
  NAV	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > NAV	Filings Workspace > N-MFP > Class Information > Item B.5 - NAV	(ArcFiling or ArcReporting)
  Net Assets of the Class	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Net Assets of the Class	Filings Workspace > N-MFP > Class Information > Item B.3 - Net Assets of the Class	(ArcFiling or ArcReporting)
  Net Investment Income Distributed Per Share	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Net Investment Income Distributed Per Share	(ArcReporting)	(ArcReporting)
  Net Shareholder activity for the month	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Net Shareholder activity for the month	Filings Workspace > N-MFP > Class Information > Net Shareholder activity for the month	(ArcFiling or ArcReporting)
  Par Value	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Par Value
  POP (Public Offering Price)	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > POP (Public Offering Price)	(ArcReporting)	(ArcReporting)
  Prospectus Ratio	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Prospectus Ratio
  Realized Gains Distributed Per Share	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Realized Gains Distributed Per Share	(ArcReporting)	(ArcReporting)
  Redemption Fee	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Redemption Fee
  Redemptions	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Redemptions	(ArcReporting)	(ArcReporting)
  Redemptions - Exchanges	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Redemptions - Exchanges	(ArcReporting)	(ArcReporting)
  Redemptions - Exchanges - Shares	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Redemptions - Exchanges - Shares	(ArcReporting)	(ArcReporting)
  Redemptions - Shares	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Redemptions - Shares	(ArcReporting)	(ArcReporting)
  Security Class	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Security Class
  SEDOL	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > SEDOL
  Shares Outstanding	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Shares Outstanding	(ArcReporting)	(ArcReporting)
  Subscriptions	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Subscriptions	(ArcReporting)	(ArcReporting)
  Subscriptions - Exchanges	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Subscriptions - Exchanges	(ArcReporting)	(ArcReporting)
  Subscriptions - Exchanges - Shares	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Subscriptions - Exchanges - Shares	(ArcReporting)	(ArcReporting)
  Subscriptions - Shares	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Subscriptions - Shares	(ArcReporting)	(ArcReporting)
  Ticker	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Ticker
  Total Return - 1 Month	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 1 Month	(ArcReporting)	(ArcReporting)
  Total Return - 1 Year	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 1 Year	(ArcReporting)	(ArcReporting)
  Total Return - 2 Year Annualized	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 2 Year Annualized	(ArcReporting)	(ArcReporting)
  Total Return - 2 Year Cumulative	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 2 Year Cumulative	(ArcReporting)	(ArcReporting)
  Total Return - 3 Month	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 3 Month	(ArcReporting)	(ArcReporting)
  Total Return - 3 Year Annualized	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 3 Year Annualized	(ArcReporting)	(ArcReporting)
  Total Return - 3 Year Cumulative	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 3 Year Cumulative	(ArcReporting)	(ArcReporting)
  Total Return - 4 Year Annualized	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 4 Year Annualized	(ArcReporting)	(ArcReporting)
  Total Return - 4 Year Cumulative	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 4 Year Cumulative	(ArcReporting)	(ArcReporting)
  Total Return - 5 Year Annualized	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 5 Year Annualized	(ArcReporting)	(ArcReporting)
  Total Return - 5 Year Cumulative	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 5 Year Cumulative	(ArcReporting)	(ArcReporting)
  Total Return - 6 Month	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 6 Month	(ArcReporting)	(ArcReporting)
  Total Return - 6 Year Annualized	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 6 Year Annualized	(ArcReporting)	(ArcReporting)
  Total Return - 6 Year Cumulative	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 6 Year Cumulative	(ArcReporting)	(ArcReporting)
  Total Return - 7 Year Annualized	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 7 Year Annualized	(ArcReporting)	(ArcReporting)
  Total Return - 7 Year Cumulative	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 7 Year Cumulative	(ArcReporting)	(ArcReporting)
  Total Return - 8 Year Annualized	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 8 Year Annualized	(ArcReporting)	(ArcReporting)
  Total Return - 8 Year Cumulative	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 8 Year Cumulative	(ArcReporting)	(ArcReporting)
  Total Return - 9 Month	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 9 Month	(ArcReporting)	(ArcReporting)
  Total Return - 9 Year Annualized	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 9 Year Annualized	(ArcReporting)	(ArcReporting)
  Total Return - 9 Year Cumulative	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 9 Year Cumulative	(ArcReporting)	(ArcReporting)
  Total Return - 10 Year Annualized	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 10 Year Annualized	(ArcReporting)	(ArcReporting)
  Total Return - 10 Year Cumulative	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - 10 Year Cumulative	(ArcReporting)	(ArcReporting)
  Total Return - Since Inception Annualized	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - Since Inception Annualized	(ArcReporting)	(ArcReporting)
  Total Return - Since Inception Cumulative	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Total Return - Since Inception Cumulative	(ArcReporting)	(ArcReporting)
  Transfer Agent Code	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Class > Transfer Agent Code
  Turnover %	Reporting Workspace > Financials > Financial Workbook > Class Balances tab > Turnover %	(ArcReporting)	(ArcReporting)

• Holdings Data Points (click to see table)

  Holdings Data Point Name	ArcReporting User Interface	ArcFiling User Interface	Environment Administration User Interface
  144A	Reporting Workspace > Portfolio > Fund Holdings > 144A	(ArcReporting)	(ArcReporting)
  Account Period	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Account Periods > Period End
  Accrued Interest	Reporting Workspace > Portfolio > Fund Holdings > Accrued Interest	(ArcReporting)	(ArcReporting)
  Affiliated	Reporting Workspace > Portfolio > Fund Holdings > Affiliated	(ArcReporting)	(ArcReporting)
  AM Best Credit Rating	Reporting Workspace > Portfolio > Fund Holdings > AMBest Credit Rating	Filings Workspace > N-MFP > Fund Holdings > Item C.10 - AMBest Credit Rating	(ArcFiling or ArcReporting)
  Balance Instance	Reporting Workspace > Portfolio > Fund Holdings > Balance Instance	Filings Workspace > N-MFP > Fund Holdings > Balance Instance	(ArcFiling or ArcReporting)
  Base Currency Bought	Reporting Workspace > Portfolio > Fund Holdings > Currency Bought - Base	(ArcReporting)	(ArcReporting)
  Base Currency Sold	Reporting Workspace > Portfolio > Fund Holdings > Currency Sold - Base	(ArcReporting)	(ArcReporting)
  Base Unit Price	Reporting Workspace > Portfolio > Fund Holdings > Unit Price - Base	(ArcReporting)	(ArcReporting)
  Bought	Reporting Workspace > Portfolio > Fund Holdings > Bought	(ArcReporting)	(ArcReporting)
  Caption	Administration > Reporting Libraries > Security/Investment Master > Security Name Reporting Workspace > Portfolio > Fund Holdings > Caption	Administration > Filing Libraries > Security/Investment Master > Security Name Filings Workspace > N-MFP > Fund Holdings > Item C.2 - Title of Issue	(ArcFiling or ArcReporting)
  Category Caption	Reporting Workspace > Portfolio > Fund Holdings > All Categories Assigned to the Fund	Filings Workspace > N-MFP > Fund Holdings > Item C.6 - Category of Investment	(ArcFiling or ArcReporting)
  Category Notes	N/A	Filings Workspace > N-MFP > Fund Holdings > Item C.6 - Description	N/A
  CIK	Reporting Workspace > Portfolio > Fund Holdings > Issuer CIK	Filings Workspace > N-MFP > Fund Holdings > Item C.1 - Name of the Issuer	(ArcFiling or ArcReporting)
  Class	Reporting Workspace > Portfolio > Fund Holdings > Class	(ArcReporting)	(ArcReporting)
  Collateral	Reporting Workspace > Portfolio > Fund Holdings > Collateral	(ArcReporting)	(ArcReporting)
  Collateral	Reporting Workspace > Portfolio > Fund Holdings > Fully Collateralized Repo	(ArcReporting)	(ArcReporting)
  Commitments	Reporting Workspace > Portfolio > Fund Holdings > Commitments	(ArcReporting)	(ArcReporting)
  Contract Rate	Reporting Workspace > Portfolio > Fund Holdings > Contract Rate	(ArcReporting)	(ArcReporting)
  Cost	Reporting Workspace > Portfolio > Fund Holdings > Cost	(ArcReporting)	(ArcReporting)
  Counterparty	Reporting Workspace > Portfolio > Fund Holdings > Counterparty	(ArcReporting)	(ArcReporting)
  Coupon Rate	Reporting Workspace > Portfolio > Fund Holdings > Coupon	Filings Workspace > N-MFP > Fund Holdings > Item C.2 - Coupon	(ArcFiling or ArcReporting)
  Coupon Rate Type	Reporting Workspace > Portfolio > Fund Holdings > Coupon Rate Type	(ArcReporting)	(ArcReporting)
  Currency Code	Reporting Workspace > Portfolio > Fund Holdings > Currency Code	(ArcReporting)	(ArcReporting)
  Currency Code Purchased	Reporting Workspace > Portfolio > Fund Holdings > Currency Code Purchased	(ArcReporting)	(ArcReporting)
  Currency Code Sold	Reporting Workspace > Portfolio > Fund Holdings > Currency Code Sold	(ArcReporting)	(ArcReporting)
  CUSIP	Administration > Reporting Libraries > Security Libraries > Security Captions tab > CUSIP Reporting Workspace > Portfolio > Fund Holdings > CUSIP	Administration > Filing Libraries > Security Libraries > Security Captions tab > CUSIP Filings Workspace > N-MFP > Fund Holdings > Item C.3 - CUSIP	(ArcFiling or ArcReporting)
  Custom Identifier	Administration > Reporting Libraries > Security Libraries > Security Captions tab > Custom Identifier Administration > Security Libraries > Security Captions tab > Custom Identifier	Reporting Workspace > Portfolio > Fund Holdings > Custom Identifier Filings Workspace > N-MFP > Fund Holdings > Item C.5.c - Other Unique Identifier	(ArcFiling or ArcReporting)
  Day To Maturity	Reporting Workspace > Portfolio > Fund Holdings > Days To Maturity	(ArcReporting)	(ArcReporting)
  DBRS Credit Rating	Reporting Workspace > Portfolio > Fund Holdings > DBRS Credit Rating	Filings Workspace > N-MFP > Fund Holdings > Item C.10 - DBRS Credit Rating	(ArcFiling or ArcReporting)
  DemandFeatureIssuerNRSROList	(ArcFiling)	Filings Workspace > N-MFP > Fund Holdings > Item C.14.e - Designated NRSRO for Demand Feature(s) or provider(s)	(ArcFiling )
  DemandFeatureIssuerNRSRORatingList	(ArcFiling)	Filings Workspace > N-MFP > Fund Holdings > Item C.14.e - Rating for each Designated NRSRO	(ArcFiling)
  DemandFeatureList	(ArcFiling)	Filings Workspace > N-MFP > Fund Holdings > Item C.14.a - Demand Feature Issuer(s)	(ArcFiling)
  Description 01	Reporting Workspace > Portfolio > Fund Holdings > Description 1	(ArcReporting)	(ArcReporting)
  Description 02	Reporting Workspace > Portfolio > Fund Holdings > Description 2	(ArcReporting)	(ArcReporting)
  Description 03	Reporting Workspace > Portfolio > Fund Holdings > Description 3	(ArcReporting)	(ArcReporting)
  Description 04	Reporting Workspace > Portfolio > Fund Holdings > Description 4	(ArcReporting)	(ArcReporting)
  Description 05	Reporting Workspace > Portfolio > Fund Holdings > Description 5	(ArcReporting)	(ArcReporting)
  Description 06	Reporting Workspace > Portfolio > Fund Holdings > Description 6	(ArcReporting)	(ArcReporting)
  Description 07	Reporting Workspace > Portfolio > Fund Holdings > Description 7	(ArcReporting)	(ArcReporting)
  Description 08	Reporting Workspace > Portfolio > Fund Holdings > Description 8	(ArcReporting)	(ArcReporting)
  Description 09	Reporting Workspace > Portfolio > Fund Holdings > Description 9	(ArcReporting)	(ArcReporting)
  Description 10	Reporting Workspace > Portfolio > Fund Holdings > Description 10	(ArcReporting)	(ArcReporting)
  Display On Condensed	Reporting Workspace > Portfolio > Fund Holdings > Display On Condensed	(ArcReporting)	(ArcReporting)
  Egan Jones Credit Rating	Reporting Workspace > Portfolio > Fund Holdings > Egan Jones Credit Rating	Filings Workspace > N-MFP > Fund Holdings > Item C.10 - Egan Jones Credit Rating	(ArcFiling or ArcReporting)
  EnhancementProviderList	(ArcFiling)	Filings Workspace > N-MFP > Fund Holdings > Item C.16.a - Identity of enhancement provider(s)	(ArcFiling)
  EnhancementProviderNRSROList	(ArcFiling)	Filings Workspace > N-MFP > Fund Holdings > Item C.16.d - Designated NRSRO for the enhancement(s) or provider(s)	(ArcFiling)
  EnhancementProviderNRSRORatingList	(ArcFiling)	Filings Workspace > N-MFP > Fund Holdings > Item C.16.d - Rating for each Designated NRSRO	(ArcFiling)
  EnhancementTypeList	(ArcFiling)	Filings Workspace > N-MFP > Fund Holdings > Item C.16.b - Type of enhancement(s)	(ArcFiling)
  Exchange Rate	Reporting Workspace > Portfolio > Fund Holdings > Exchange Rate	(ArcReporting)	(ArcReporting)
  Expiration Date	Reporting Workspace > Portfolio > Fund Holdings > Expiration Date	(ArcReporting)	(ArcReporting)
  Fair Value Level	Reporting Workspace > Portfolio > Fund Holdings > Fair Value Level	(ArcReporting)	(ArcReporting)
  Fair Value Type	Reporting Workspace > Portfolio > Fund Holdings > Fair Value Type	(ArcReporting)	(ArcReporting)
  Fair Valued	Reporting Workspace > Portfolio > Fund Holdings > Fair Valued	(ArcReporting)	(ArcReporting)
  Final Legal Maturity Date	Reporting Workspace > Portfolio > Fund Holdings > Final Legal Maturity Date	Filings Workspace > N-MFP > Fund Holdings > Item C.12 - Maturity Date (WAL)	(ArcFiling or ArcReporting)
  Fitch Credit Rating	Reporting Workspace > Portfolio > Fund Holdings > Fitch Credit Rating	Filings Workspace > N-MFP > Fund Holdings > Item C.10 - Fitch Credit Rating	(ArcFiling or ArcReporting)
  Fixed Interest	Reporting Workspace > Portfolio > Fund Holdings > Fixed Interest	(ArcReporting)	(ArcReporting)
  Floating Interest	Reporting Workspace > Portfolio > Fund Holdings > Floating Interest	(ArcReporting)	(ArcReporting)
  Fund Code	(Environment Administration)	(Environment Administration)	Environment Administration > Settings > Funds > Fund > Fund Code
  GuarantorList	(ArcFiling)	Filings Workspace > N-MFP > Fund Holdings > Item C.15.a - Identity of guarantor(s)	(ArcFiling)
  GuarantorNRSROList	(ArcFiling)	Filings Workspace > N-MFP > Fund Holdings > Item C.15.c - Designated NRSRO for the guarantor(s)	(ArcFiling)
  GuarantorNRSRORatingList	(ArcFiling)	Filings Workspace > N-MFP > Fund Holdings > Item C.15.c - Rating for each Designated NRSRO	(ArcFiling)
  Has Demand Feature	Reporting Workspace > Portfolio > Fund Holdings > Has Demand Feature	Filings Workspace > N-MFP > Fund Holdings > Item C.14 - Security has Demand Feature	(ArcFiling or ArcReporting)
  Has Enhancement	Reporting Workspace > Portfolio > Fund Holdings > Has Enhancement	Filings Workspace > N-MFP > Fund Holdings > Item C.16 - Security have any enhancements	(ArcFiling or ArcReporting)
  Has Guarantee	Reporting Workspace > Portfolio > Fund Holdings > Has Guarantee	Filings Workspace > N-MFP > Fund Holdings > Item C.15 - Security has a guarantee	(ArcFiling or ArcReporting)
  Illiquid Security	Reporting Workspace > Portfolio > Fund Holdings > Illiquid Security	Filings Workspace > N-MFP > Fund Holdings > Item C.23 - Illiquid Security	(ArcFiling or ArcReporting)
  In Default	Reporting Workspace > Portfolio > Fund Holdings > In Default	(ArcReporting)	(ArcReporting)
  Investment Type	Administration > Reporting Libraries > Security/Investment Master > Investment Type Reporting Workspace > Portfolio > Fund Holdings > Investment Type	Administration > Filing Libraries > Security/Investment Master > Investment Type	(ArcFiling or ArcReporting)
  ISIN	Administration > Reporting Libraries > Security Libraries > Security Captions tab > ISIN Reporting Workspace > Portfolio > Fund Holdings > ISIN	Administration > Filing Libraries > Security Libraries > Security Captions tab > ISIN	(ArcFiling or ArcReporting)
  Issuer	Reporting Workspace > Portfolio > Fund Holdings > Issuer Caption	(ArcReporting)	(ArcReporting)
  JCR Credit Rating	Reporting Workspace > Portfolio > Fund Holdings > JCR Credit Rating	Filings Workspace > N-MFP > Fund Holdings > Item C.10 - JCR Credit Rating	(ArcFiling or ArcReporting)
  LACE Credit Rating	Reporting Workspace > Portfolio > Fund Holdings > Kroll Credit Rating (FKA LACE)	Filings Workspace > N-MFP > Fund Holdings > Item C.10 - Kroll Credit Rating (FKA LACE)	(ArcFiling or ArcReporting)
  Language Code	Reporting Workspace > Portfolio > Fund Holdings > Language	(ArcReporting)	(ArcReporting)
  Local Cross Trade	Reporting Workspace > Portfolio > Fund Holdings > Local Cross Trade	(ArcReporting)	(ArcReporting)
  Local Currency Bought	Reporting Workspace > Portfolio > Fund Holdings > Currency Bought - Local	(ArcReporting)	(ArcReporting)
  Local Currency Sold	Reporting Workspace > Portfolio > Fund Holdings > Currency Sold - Local	(ArcReporting)	(ArcReporting)
  Local Unit Price	Reporting Workspace > Portfolio > Fund Holdings > Unit Price - Local	(ArcReporting)	(ArcReporting)
  Market Value	Reporting Workspace > Portfolio > Fund Holdings > Market Value	(ArcReporting)	(ArcReporting)
  Market Value Ask	Reporting Workspace > Portfolio > Fund Holdings > Market Value Ask	(ArcReporting)	(ArcReporting)
  Market Value Bid	Reporting Workspace > Portfolio > Fund Holdings > Market Value Bid	(ArcReporting)	(ArcReporting)
  Master Identifier	Administration > Reporting Libraries > Security/Investment Master > Master Identifier	Administration > Filing Libraries > Security/Investment Master > Master Identifier Filings Workspace > N-MFP > Fund Holdings > Master Identifier	(ArcFiling or ArcReporting)
  Maturity Date	Reporting Workspace > Portfolio > Fund Holdings > Maturity Date	Filings Workspace > N-MFP > Fund Holdings > Item C.11 - Maturity Date (WAM)	(ArcFiling or ArcReporting)
  Moodys Credit Rating	Reporting Workspace > Portfolio > Fund Holdings > Moody’s Credit Rating	Filings Workspace > N-MFP > Fund Holdings > Item C.10 - Moody’s Credit Rating	(ArcFiling or ArcReporting)
  Multiplier	Reporting Workspace > Portfolio > Fund Holdings > Multiplier	(ArcReporting)	(ArcReporting)
  NMFP Notes	Reporting Workspace > Portfolio > Fund Holdings > Explanatory Notes	Filings Workspace > N-MFP > Fund Holdings > Item C.24 - Explanatory Notes	(ArcFiling or ArcReporting)
  Non Income	Reporting Workspace > Portfolio > Fund Holdings > Non Income	(ArcReporting)	(ArcReporting)
  Notional Amount	Reporting Workspace > Portfolio > Fund Holdings > Notional Amount	(ArcReporting)	(ArcReporting)
  On Loan	Reporting Workspace > Portfolio > Fund Holdings > On Loan	(ArcReporting)	(ArcReporting)
  Option Premium	Reporting Workspace > Portfolio > Fund Holdings > Option Premium	(ArcReporting)	(ArcReporting)
  Other Credit Rating 1	Reporting Workspace > Portfolio > Fund Holdings > Other Credit Rating 1	(ArcReporting)	(ArcReporting)
  Other Credit Rating 2	Reporting Workspace > Portfolio > Fund Holdings > Other Credit Rating 2	(ArcReporting)	(ArcReporting)
  Other Credit Rating 3	Reporting Workspace > Portfolio > Fund Holdings > Other Credit Rating 3	(ArcReporting)	(ArcReporting)
  Other Credit Rating 4	Reporting Workspace > Portfolio > Fund Holdings > Other Credit Rating 4	(ArcReporting)	(ArcReporting)
  Other Credit Rating 5	Reporting Workspace > Portfolio > Fund Holdings > Other Credit Rating 5	(ArcReporting)	(ArcReporting)
  Other Credit Rating 6	Reporting Workspace > Portfolio > Fund Holdings > Other Credit Rating 6	(ArcReporting)	(ArcReporting)
  Pay Type	Reporting Workspace > Portfolio > Fund Holdings > Pay Type	(ArcReporting)	(ArcReporting)
  Perpetual	Reporting Workspace > Portfolio > Fund Holdings > Perpetual	(ArcReporting)	(ArcReporting)
  Position Type	Reporting Workspace > Portfolio > Fund Holdings > Position Type	(ArcReporting)	(ArcReporting)
  Proceeds	Reporting Workspace > Portfolio > Fund Holdings > Proceeds	(ArcReporting)	(ArcReporting)
  Purchase Amount Base	Reporting Workspace > Portfolio > Fund Holdings > Purchase Amount Base	(ArcReporting)	(ArcReporting)
  Purchase Amount Local	Reporting Workspace > Portfolio > Fund Holdings > Purchase Amount Local	(ArcReporting)	(ArcReporting)
  Purchase Cost	Reporting Workspace > Portfolio > Fund Holdings > Purchase Cost	(ArcReporting)	(ArcReporting)
  R&I Credit Rating	Reporting Workspace > Portfolio > Fund Holdings > R&I Credit Rating	(ArcReporting)	(ArcReporting)
  Realpoint Credit Rating	Reporting Workspace > Portfolio > Fund Holdings > Morningstar Credit Rating (FKA Realpoint)	Filings Workspace > N-MFP > Fund Holdings > Item C.10 - Morningstar Credit Rating (FKA Realpoint)	(ArcFiling or ArcReporting)
  Receive Type	Reporting Workspace > Portfolio > Fund Holdings > Receive Type	(ArcReporting)	(ArcReporting)
  Repo Used For Diversification	Reporting Workspace > Portfolio > Fund Holdings > Is Repo Used for Diversification	Filings Workspace > N-MFP > Fund Holdings > Item C.7 - Is Repo Used for Diversification	(ArcFiling or ArcReporting)
  Reset Date	Reporting Workspace > Portfolio > Fund Holdings > Reset Date	(ArcReporting)	(ArcReporting)
  Restricted	Reporting Workspace > Portfolio > Fund Holdings > Restricted	(ArcReporting)	(ArcReporting)
  S&P Credit Rating	Reporting Workspace > Portfolio > Fund Holdings > S&P Credit Rating	Filings Workspace > N-MFP > Fund Holdings > Item C.10 - S&P Credit Rating	(ArcFiling or ArcReporting)
  Security Rating	Reporting Workspace > Portfolio > Fund Holdings > Security Rating	(ArcReporting)	(ArcReporting)
  SEDOL	Administration > Reporting Libraries > Security Libraries > Security Captions tab > SEDOL Reporting Workspace > Portfolio > Fund Holdings > SEDOL	Administration > Filing Libraries > Security Libraries > Security Captions tab > SEDOL	(ArcFiling or ArcReporting)
  Series	Reporting Workspace > Portfolio > Fund Holdings > Series	(ArcReporting)	(ArcReporting)
  Shares	Reporting Workspace > Portfolio > Fund Holdings > Shares	(ArcReporting)	(ArcReporting)
  Short Term Debt	Reporting Workspace > Portfolio > Fund Holdings > Short-Term Debt	(ArcReporting)	(ArcReporting)
  Sold	Reporting Workspace > Portfolio > Fund Holdings > Sold	(ArcReporting)	(ArcReporting)
  Sold Amount Base	Reporting Workspace > Portfolio > Fund Holdings > Sold Amount Base	(ArcReporting)	(ArcReporting)
  Sold Amount Local	Reporting Workspace > Portfolio > Fund Holdings > Sold Amount Local	(ArcReporting)	(ArcReporting)
  Source	Reporting Workspace > Portfolio > Fund Holdings > Security Balance Source	(ArcReporting)	(ArcReporting)
  Step-up Bond	Reporting Workspace > Portfolio > Fund Holdings > Step-up Bond	(ArcReporting)	(ArcReporting)
  Strike Price	Reporting Workspace > Portfolio > Fund Holdings > Strike Price	(ArcReporting)	(ArcReporting)
  Strips	Reporting Workspace > Portfolio > Fund Holdings > Strips	(ArcReporting)	(ArcReporting)
  TBA Description	Reporting Workspace > Portfolio > Fund Holdings > TBA Description	(ArcReporting)	(ArcReporting)
  Unrealized Value	Reporting Workspace > Portfolio > Fund Holdings > Unrealized	(ArcReporting)	(ArcReporting)
  Valoren	Administration > Reporting Libraries > Security Libraries > Security Captions tab > Valoren Reporting Workspace > Portfolio > Fund Holdings > Valoren	Administration > Filing Libraries > Security Libraries > Security Captions tab > Valoren	(ArcFiling or ArcReporting)
  Variable Rate	Reporting Workspace > Portfolio > Fund Holdings > Variable Rate	(ArcReporting)	(ArcReporting)
  Werkpapier	Administration > Reporting Libraries > Security Libraries > Security Captions tab > Werkpapier Reporting Workspace > Portfolio > Fund Holdings > Werkpapier	Administration > Filing Libraries > Security Libraries > Security Captions tab > Werkpapier	(ArcFiling or ArcReporting)
  When-Issued	Reporting Workspace > Portfolio > Fund Holdings > When-Issued	(ArcReporting)	(ArcReporting)
  Yield	Reporting Workspace > Portfolio > Fund Holdings > Yield	Filings Workspace > N-MFP > Fund Holdings > Item C.17 - Yield	(ArcFiling or ArcReporting)
  Yield Date	Reporting Workspace > Portfolio > Fund Holdings > Yield Date	(ArcReporting)	(ArcReporting)
  Zero Coupon	Reporting Workspace > Portfolio > Fund Holdings > Zero Coupon	(ArcReporting)	(ArcReporting)

1. Expand the ArcFiling “N-MFP” menu.

   1. Click the “Home” button at the top of the application window to return to the landing page.

   2. Select “ArcFiling” from the components list.

      

   3. Click the “Filings Workspace” tab at lower-left of the screen.

      

   4. Click the “N-MFP” menu to view available items.

      If the “Account Period”, “Complex” and “Fund” relevant to the data you wish to view are not currently selected, choose them using the either selection button at upper-left of the screen or the selection bar across the top of the window.

      • Using the selection bar

        1. Click the “[Select Date]” text or “»” symbol.

           All open account periods associated with a project, and to which you have access, are displayed.

           

        2. Click the “[Select Complex]” text or “»” symbol.

           Complexes with projects associated with the specified date are displayed.

           

           If only one complex is available based on the specified date, the complex is automatically chosen.

        3. Click the “[Select Group]” text or “»” symbol.

           Groups associated with the specified complex with active projects for the specified date are displayed.

           

           Alternatively, you can specify “All Fund Groups”, which automatically fills in “All Funds” in the step below. Some pages in Arc Suite (e.g., “Fund Holdings”), allow you to view information for more than one fund simultaneously. If a page does not support multiple fund display, then no information displays when “All Fund Groups » All Funds” is specified.

           

           If only one fund group is available based on the specified complex, the group is automatically chosen.

        4. Click the “[Select Fund]” text or “»” symbol.

           Funds associated with the specified group with active projects for the specified date are displayed.

           

           Alternatively, you can specify “All Funds”.

           

           If only one fund is available based on the specified group, the fund is automatically chosen.

        When all elements of the fund selection bar are specified, you have several options available in terms of viewing different sets of data for open pages.

        

        • Change the specified date. The list of dates is filtered for active projects for the specified fund. Changing the date refreshes the data for all open pages.
        • Change the complex. Changing the complex resets the group, and you’ll need to return to Step 3 above.
        • Change the group. Changing the group resets the fund, and you’ll need to return to Step 4 above.
        • Change the fund. Changing the fund refreshes the data for all open pages.
        • Reset the fund selection bar. Click the “Reset” button at any time to return to Step 1 above.

      • Using the selection button

        1. Click the selection button at upper-left of the window.

           All open account periods associated with a project, and to which you have access, are displayed.

           

           If an account period has already been specified via the fund selection bar (see above), the list under the fund selection button automatically expands that date.

           

        2. Click the arrow at left of the desired account period to display the available complex(es) and associated fund group(s) and fund(s).
        3. Specify the “Complex”, “Fund Group” and “Fund” relevant to the project you wish to view.

2. Expand the ArcReporting “Portfolio” menu.

   1. Click the “Home” button at the top of the application window to return to the landing page.

   2. Select “ArcReporting” from the components list.

      

   3. Click the “Reporting Workspace” tab at lower-left of the screen.

      

   4. Click the “Portfolio” menu to view available items.

      If the “Account Period”, “Complex” and “Fund” relevant to the data you wish to view are not currently selected, choose them using the either selection button at upper-left of the screen or the selection bar across the top of the window.

      • Using the selection bar

        1. Click the “[Select Date]” text or “»” symbol.

           All open account periods associated with a project, and to which you have access, are displayed.

           

        2. Click the “[Select Complex]” text or “»” symbol.

           Complexes with projects associated with the specified date are displayed.

           

           If only one complex is available based on the specified date, the complex is automatically chosen.

        3. Click the “[Select Group]” text or “»” symbol.

           Groups associated with the specified complex with active projects for the specified date are displayed.

           

           Alternatively, you can specify “All Fund Groups”, which automatically fills in “All Funds” in the step below. Some pages in Arc Suite (e.g., “Fund Holdings”), allow you to view information for more than one fund simultaneously. If a page does not support multiple fund display, then no information displays when “All Fund Groups » All Funds” is specified.

           

           If only one fund group is available based on the specified complex, the group is automatically chosen.

        4. Click the “[Select Fund]” text or “»” symbol.

           Funds associated with the specified group with active projects for the specified date are displayed.

           

           Alternatively, you can specify “All Funds”.

           

           If only one fund is available based on the specified group, the fund is automatically chosen.

        When all elements of the fund selection bar are specified, you have several options available in terms of viewing different sets of data for open pages.

        

        • Change the specified date. The list of dates is filtered for active projects for the specified fund. Changing the date refreshes the data for all open pages.
        • Change the complex. Changing the complex resets the group, and you’ll need to return to Step 3 above.
        • Change the group. Changing the group resets the fund, and you’ll need to return to Step 4 above.
        • Change the fund. Changing the fund refreshes the data for all open pages.
        • Reset the fund selection bar. Click the “Reset” button at any time to return to Step 1 above.

      • Using the selection button

        1. Click the selection button at upper-left of the window.

           All open account periods associated with a project, and to which you have access, are displayed.

           

           If an account period has already been specified via the fund selection bar (see above), the list under the fund selection button automatically expands that date.

           

        2. Click the arrow at left of the desired account period to display the available complex(es) and associated fund group(s) and fund(s).
        3. Specify the “Complex”, “Fund Group” and “Fund” relevant to the project you wish to view.

3. Click the “Fund Holdings” item.

   The “Fund Holdings” page displays, which provides the relevant financial data for each security held by the selected fund.

   

   To modify a value, simply type in the corresponding field or click the relevant field link.

   You must save information before navigating between tabs.

   • You can filter the holdings that display in the grid by balance type, language and account period using the corresponding controls in the section at the top of the page.

   • The column headers in the grid are color coded, based on the type of data contained in each.

     • Blue - Fields with this coloration (e.g., “Caption”, “Description 1”, “Maturity Date”, etc.) are associated with the security library, and their values are common across the library. Changes can be made to these fields from the “Fund Holdings” or “Security Libraries” pages. Changes to these fields will impact all funds assigned to the same security library.

     • Red - The only field with this coloration is “Item C.1 - Name of the Issuer”“Issuer Caption”. It is common across all funds using the same issuer caption library. The field value can only be changed on the “Issuer Library” page. The “Fund Holdings” page allows you to update the “Issuer” assignment only.

       The “Issuer” assignment syncing is based on the “Security Library” assignment, not the “Issuer Library”.

     • Orange - Fields with this coloration (e.g., “Category of Investment”, “Country”, “Sector”, etc.) are associated with the category library, and their values are common across the library. Changes to “Category” assignment can be made on the “Fund Holdings” page. Changes to the “Category” assignment will impact all funds assigned to that particular category library. Changes to the category captions can be made on the “Category Libraries” page only. Changes made to captions will impact all funds assigned to that library.
     • (shaded) - Fields whose header is shaded with a gray gradient are associated with either the Security/Investment Master library (e.g., “Master Identifier”, etc.) or the Issuer Master library (“Issuer CIK”), and are common across the database. Changes to their values can only be made on the “Security/Investment Master” or “Issuer Master” pages, respectively, or updated during data load. Changes to these fields impact all funds across the database. Columns containing system calculations (e.g., “% of Net Assets”, “% of par”, etc.) are also read-only on the “Fund Holdings” page.
     • (no coloration) - Fields whose header has no shading nor coloration at all (e.g., “Shares”, “Market Value”, “Cost”, etc.) contain security balance data, and are unique to the specified fund, account period and balance instance. Changes made to these fields never impact nor synchronize with any other instance of the security.
   • Click the “Refresh data” button at lower-right of the tab to display the latest holdings data contained in the database.
4. Click the “View” drop-down list at the top of the page to specify the system or custom view with which you will display existing data in the grid of the “Holdings” tab.
5. Click the “Search” button at right of the “Search Criteria” section to load existing data in the grid.

6. Click the “Save” button at lower-right of the page if any updates were made.

You can sort, group and filter information in a grid through various means in order to find what you’re looking for more easily.

Grid Management

1. Filtering: You can filter the items presented in a grid by using the “Filter” buttons at the top of any column.

   1. To remove any particular column filter, click the “Filter” button at the top of that column, and then click the “Clear Filter” button on the filter criteria dialogue that displays.

   2. To remove all column filters for the grid at once, click the “Clear all filters” button at upper-left of the grid.

      The “Clear all filters” button is not available on all Arc Suite grids.

      • The “Clear all filters” button is not available on all Arc Suite grids.
      • Column filtering only affects the rows that have been loaded in the grid. If grid pagination functionality is enabled for the “Holdings” tab of the “Fund Holdings” page (via the “FundHoldingsGridPagination” system setting), be sure all available rows have been loaded if you expect column filtering to affect all securities in the data set.
2. Sorting: You can sort items in a grid by clicking any column header. Once sorted, the column header will change color and indicate whether the list is sorted in ascending or descending order.

3. Grouping: In some grids, the items can be grouped in the display by selecting a column header, and then dragging it into the “Grouped by” area of a grid.

   1. To expand or collapse a grouping, click the buttons, respectively, at left of the grouping row in the grid.

   2. To remove a grouping, hover your cursor over the grouping box, and then click the “Remove” button that displays on its right.

      

4. Grid Splitting: Grids feature a vertical splitter bar, which you can grab and move over the line dividing any two columns. As you scroll horizontally to see more columns of data, the columns to the left of the splitter bar are “frozen” in view.

5. Pagination: Some grids feature a “Rows Per Page” spinner control at lower-left, which you can use to specify the maximum number of records/rows to display in the grid at once. If the number of records in the database meeting the specified criteria exceeds the specified “Rows Per Page” value, a set of navigation controls at lower-right of the grid is enabled to allow access to the records in successive grid “pages”.

   If grid pagination functionality is enabled for the “Holdings” tab of the “Fund Holdings” page (via the “FundHoldingsGridPagination” system setting), the value specified for the associated “FundHoldingsGridPageSize” setting will determine the upper limit of the “Rows Per Page” spinner control, as well as how many rows are loaded at once to the grid.

6. Field Selection: You can also specify which columns of data to show in the current grid. You can choose from one or more “standard” views of the grid, or you can create and save your own custom views.

   1. Choosing a View. Using the “View” selection drop-down list associated with the grid, you can switch between custom views and standard views.

   2. Creating a Custom View. You can leverage the standard views or existing custom views as starting points to create new custom views (standard views cannot be edited).

      1. Choose a view that most closely resembles the view you’d like to create.

      2. Select “Save View As...” from the “Action” button menu to name the new custom view.

         The “Save View As...” dialogue displays.

         

         

         1. Specify the desired “View Name”.

         2. For the “Fund Holdings” page, also use the corresponding option button set on the dialogue to specify whether the new view will be visible to only you (“User” selection), or to all application users in the current environment (“Global” selection).

            

            You must be assigned the “Add/Edit/Delete Global Fund Holdings Views” user right to specify the “Global” selection (the option button is disabled if you are not assigned the right).

         3. Click the “Accept” button at lower-right of the dialogue to save the new view.

            The new view is automatically selected in the “View” drop-down list.

            

      3. Edit the new custom view, as needed.

         1. The following properties of a custom view can be modified, and these changes are retained when the view is saved:

            1. View name

               1. Select “Edit View” from the “Action” button menu to change the name of the custom view.

                  The “Edit View” dialogue displays.

                  

                  1. Specify the desired “View Name”.

                  2. Click the “Accept” button at lower-right of the dialogue.

            2. Columns shown in view

               1. Select “Edit View” from the “Action” button menu to add or remove columns from the custom view.

                  The “Edit View” dialogue displays.

                  

                  1. Select or clear the check box in the “Visible” column of the grid for each field you wish to show or hide in the custom view.

                  2. Click the “Accept” button at lower-right of the dialogue.

            3. Numeric-type column subtotal display for groups (“Fund Holdings” page only)

               1. Select “Edit View” from the “Action” button menu to display or hide a subtotal for one or more numeric-type fields in each group of the view.

                  The “Edit View” dialogue displays.

                  

                  1. Select or clear the check box in the “Calc” column of the grid for each field for which you wish to show or hide a subtotal.

                  2. Click the “Accept” button at lower-right of the dialogue.

            4. Column ordering

               1. Arrange the visible columns in any order by dragging-and-dropping them within the grid.
               2. Select “Save View” from the “Action” button menu to save this and all other properties of the current view.

            5. Column widths

               1. As required, adjust the width of one or more visible columns in the grid by dragging the left or right edge of the corresponding column header(s).
               2. Select “Save View” from the “Action” button menu to save this and all other properties of the current view.

            6. Grid grouping

               1. Set up groups of data in the grid by dragging one or more column headers into the grouping section above the grid.
               2. Select “Save View” from the “Action” button menu to save this and all other properties of the current view.

         Column sorting, column filters and the grid splitter position are not currently remembered as part of the custom view functionality.

      Only the standard views are visible to all users. Custom views are only visible to the user who created them.

   3. Viewing All Columns. The standard “All columns” selection allows you to quickly view all available columns for the current grid.

      

   You can change the settings of a standard view while it’s selected, but such changes will not be saved. You can only permanently save changes to custom views.

1. Expand the ArcFiling “N-MFP” menu.

   1. Click the “Home” button at the top of the application window to return to the landing page.

   2. Select “ArcFiling” from the components list.

      

   3. Click the “Filings Workspace” tab at lower-left of the screen.

      

   4. Click the “N-MFP” menu to view available items.

      If the “Account Period”, “Complex” and “Fund” relevant to the data you wish to view are not currently selected, choose them using the either selection button at upper-left of the screen or the selection bar across the top of the window.

      • Using the selection bar

        1. Click the “[Select Date]” text or “»” symbol.

           All open account periods associated with a project, and to which you have access, are displayed.

           

        2. Click the “[Select Complex]” text or “»” symbol.

           Complexes with projects associated with the specified date are displayed.

           

           If only one complex is available based on the specified date, the complex is automatically chosen.

        3. Click the “[Select Group]” text or “»” symbol.

           Groups associated with the specified complex with active projects for the specified date are displayed.

           

           Alternatively, you can specify “All Fund Groups”, which automatically fills in “All Funds” in the step below. Some pages in Arc Suite (e.g., “Fund Holdings”), allow you to view information for more than one fund simultaneously. If a page does not support multiple fund display, then no information displays when “All Fund Groups » All Funds” is specified.

           

           If only one fund group is available based on the specified complex, the group is automatically chosen.

        4. Click the “[Select Fund]” text or “»” symbol.

           Funds associated with the specified group with active projects for the specified date are displayed.

           

           Alternatively, you can specify “All Funds”.

           

           If only one fund is available based on the specified group, the fund is automatically chosen.

        When all elements of the fund selection bar are specified, you have several options available in terms of viewing different sets of data for open pages.

        

        • Change the specified date. The list of dates is filtered for active projects for the specified fund. Changing the date refreshes the data for all open pages.
        • Change the complex. Changing the complex resets the group, and you’ll need to return to Step 3 above.
        • Change the group. Changing the group resets the fund, and you’ll need to return to Step 4 above.
        • Change the fund. Changing the fund refreshes the data for all open pages.
        • Reset the fund selection bar. Click the “Reset” button at any time to return to Step 1 above.

      • Using the selection button

        1. Click the selection button at upper-left of the window.

           All open account periods associated with a project, and to which you have access, are displayed.

           

           If an account period has already been specified via the fund selection bar (see above), the list under the fund selection button automatically expands that date.

           

        2. Click the arrow at left of the desired account period to display the available complex(es) and associated fund group(s) and fund(s).
        3. Specify the “Complex”, “Fund Group” and “Fund” relevant to the project you wish to view.

2. Expand the ArcReporting “Document Assembly” menu.

   1. Click the “Home” button at the top of the application window to return to the landing page.

   2. Select “ArcReporting” from the components list.

      

   3. Click the “Reporting Workspace” tab at lower-left of the screen.

      

   4. Click the “Document Assembly” menu to view available items.

      If the “Account Period”, “Complex” and “Fund” relevant to the data you wish to view are not currently selected, choose them using the either selection button at upper-left of the screen or the selection bar across the top of the window.

      • Using the selection bar

        1. Click the “[Select Date]” text or “»” symbol.

           All open account periods associated with a project, and to which you have access, are displayed.

           

        2. Click the “[Select Complex]” text or “»” symbol.

           Complexes with projects associated with the specified date are displayed.

           

           If only one complex is available based on the specified date, the complex is automatically chosen.

        3. Click the “[Select Group]” text or “»” symbol.

           Groups associated with the specified complex with active projects for the specified date are displayed.

           

           Alternatively, you can specify “All Fund Groups”, which automatically fills in “All Funds” in the step below. Some pages in Arc Suite (e.g., “Fund Holdings”), allow you to view information for more than one fund simultaneously. If a page does not support multiple fund display, then no information displays when “All Fund Groups » All Funds” is specified.

           

           If only one fund group is available based on the specified complex, the group is automatically chosen.

        4. Click the “[Select Fund]” text or “»” symbol.

           Funds associated with the specified group with active projects for the specified date are displayed.

           

           Alternatively, you can specify “All Funds”.

           

           If only one fund is available based on the specified group, the fund is automatically chosen.

        When all elements of the fund selection bar are specified, you have several options available in terms of viewing different sets of data for open pages.

        

        • Change the specified date. The list of dates is filtered for active projects for the specified fund. Changing the date refreshes the data for all open pages.
        • Change the complex. Changing the complex resets the group, and you’ll need to return to Step 3 above.
        • Change the group. Changing the group resets the fund, and you’ll need to return to Step 4 above.
        • Change the fund. Changing the fund refreshes the data for all open pages.
        • Reset the fund selection bar. Click the “Reset” button at any time to return to Step 1 above.

      • Using the selection button

        1. Click the selection button at upper-left of the window.

           All open account periods associated with a project, and to which you have access, are displayed.

           

           If an account period has already been specified via the fund selection bar (see above), the list under the fund selection button automatically expands that date.

           

        2. Click the arrow at left of the desired account period to display the available complex(es) and associated fund group(s) and fund(s).
        3. Specify the “Complex”, “Fund Group” and “Fund” relevant to the project you wish to view.

3. Click the “N-MFP Project” item.

   The “N-MFP Project” page displays.

   

   If only one project exists for the selected account period and fund, its contents will be displayed on the “N-MFP Project” page.

   1. If more than one project is available for the selected account period and fund, use the “Project” drop-down list at upper-left of the page to specify the project you’d like to view.

   2. If more than one language is defined for the selected project’s template, and the “Separate outputs for each language” option is selected for the template, use the “Language” drop-down list at upper-left of the page to specify the language whose captions/content you’d like to view.

      If the project template’s “Multi-Language Behavior” setting is set to “Use translated content from import file”, each non-default language in the drop-down list will display an icon at its right () to denote the ability to import translated content for that language.

4. Click the “Components” tab to view information about the various components that make up your project (shown in the “Project Content” tree view at left).

   1. Project (topmost tree view node)

      1. The following project information displays on the tab:

         • Project Name
         • Project Description
         • Project Code
         • Project Instance ID
         • Balance Type
         • Account Period End
         • Account Period Type
         • Complex
         • Output Media
         • Multi-Language Behavior
         • Default Language
         • Fund(s)

         • The status of calculations for the “primary” portfolio statement template designated for the account period and a given fund displays in the “Fund(s)” grid.

           • If no primary portfolio statement template is designated for a fund, the status displays as “Not Calculated”.
           • If calculations for the primary portfolio statement are not complete, the status displays as “Not Calculated”.
           • If no holdings data have been loaded/imported/manually entered for the fund and account period, the status displays as “No Balance Set”.

         • For projects that have a financial workbook assigned via the “Settings” tab of the “Project Templates” page, the status of calculations for the workbook displays in the “Fund(s)” grid.

           • If calculations for the workbook are not complete, the status displays as “Not Calculated”.
           • If no balance set exists for the fund and account period, the status displays as “No Balance Set”.

      2. Click the “Unlink All Components” button at lower-left of the tab to disconnect all unlinkable components in all chapters and sections of the project from the libraries that normally feed their display.

         • You must be assigned the “Unlink All Components” right to click the button. The button is disabled if you are not assigned the right.

         • Only components of the type(s) corresponding to your assigned specific “Unlink …” right(s) in the “Project Component Unlinking” user right group will be unlinked (e.g., If you only have the “Unlink Financial Tables” right assigned, only financial statements in the project [and in any chapters or sections therein] will be unlinked).

         Once components have been unlinked, they must be linked one-by-one, using the “Link Component” button associated with each. To link any given component, you must be assigned the appropriate component-specific “Link …” right in the “Project Component Linking” user right group.

         • Unlinkable components include portfolio statements, financial statements, tabular data, text snippets of type “Link To Text Library” and charts (except those of type “External Source Data”).
         • If one or more unlinkable components in the project (and components in any chapters or sections therein) has not been previewed, or if output has not been generated for the project, those components will not be unlinked; you must preview each component in the project, or generate output for the entire project prior to unlinking all its components.
         • Data for unlinked components is cached (i.e., not re-calculated upon preview or output generation) and can be manually edited within the “Project” page.
         • If all components contained in all chapters and sections of the project are already unlinked, clicking the button will have no effect.
   2. Chapter

      1. The following chapter information displays on the tab:

         • Chapter Name
         • Chapter Code
         • Production Team
         • Chapter Behavior
         • Financial Workbook Name (for chapters defined as “All Funds - Combined”, “All Funds - Single” or “All Funds - Repeat”)
         • Fund Name (for chapters defined as “All Funds - Repeat”)
         • Publishing Template

      2. Click the “Unlink Components” button at lower-left of the tab to disconnect all unlinkable components in the chapter (and components in any sections therein) from the libraries that normally feed their display.

         • You must be assigned the “Unlink All Components” right to click the button. The button is disabled if you are not assigned the right.

         • Only components of the type(s) corresponding to your assigned specific “Unlink …” right(s) in the “Project Component Unlinking” user right group will be unlinked (e.g., If you only have the “Unlink Financial Tables” right assigned, only financial statements in the chapter [and in any sections therein] will be unlinked.

         Once components have been unlinked, they must be linked one-by-one, using the “Link Component” button associated with each. To link any given component, you must be assigned the appropriate component-specific “Link …” right in the “Project Component Linking” user right group.

         • Unlinkable components include portfolio statements, financial statements, tabular data, text snippets of type “Link To Text Library” and charts (except those of type “External Source Data”).
         • If one or more unlinkable components in the chapter (and components in any sections therein) has not been previewed, or if output has not been generated for the chapter, those components will not be unlinked; you must preview each component in the chapter, or generate output for the chapter (or the entire project) prior to unlinking all its components.
         • Data for unlinked components is cached (i.e., not re-calculated upon preview or output generation) and can be manually edited within the “Project” page.
         • If no components in the chapter are linkable/unlinkable (e.g., images, text snippets, etc.), clicking the button will have no effect.
   3. Section

      1. The following section information displays on the tab:

         • Section Name
         • Section Code
         • Section Behavior
         • Account Period
         • Financial Workbook Name (for sections defined as “All Funds - Combined”, “All Funds - Single” or “All Funds - Repeat”)
         • Fund Name (for sections defined as “All Funds - Repeat”)

      2. Click the “Unlink Components” button at lower-left of the tab to disconnect all unlinkable components in the section from the libraries that normally feed their display.

         • You must be assigned the “Unlink All Components” right to click the button. The button is disabled if you are not assigned the right.

         • Only components of the type(s) corresponding to your assigned specific “Unlink …” right(s) in the “Project Component Unlinking” user right group will be unlinked (e.g., If you only have the “Unlink Financial Tables” right assigned, only financial statements in the section will be unlinked.

         Once components have been unlinked, they must be linked one-by-one, using the “Link Component” button associated with each. To link any given component, you must be assigned the appropriate component-specific “Link …” right in the “Project Component Linking” user right group.

         • Unlinkable components include portfolio statements, financial statements, tabular data, text snippets of type “Link To Text Library” and charts (except those of type “External Source Data”).
         • If one or more unlinkable components in the section has not been previewed, or if output has not been generated for the section, those components will not be unlinked; you must preview each component in the section, or generate output for the section (or the containing chapter or entire project) prior to unlinking all its components.
         • Data for unlinked components is cached (i.e., not re-calculated upon preview or output generation) and can be manually edited within the “Project” page.
         • If no components in the section are linkable/unlinkable (e.g., images, text snippets, etc.), clicking the button will have no effect.
   4. Text Snippet

      • Any component with imported language content is automatically unlinked.

      • While other component types support post-import editing of translated content, the content of translated text snippets is currently read-only; to make updates to translated text snippet content, you must re-import an updated translation file.

      • For text snippets whose content reflects that of an imported translation file, none of the functions described below are available via the “Components” tab.

      1. The following information displays on the tab:

         • Text Snippet Name
         • Text Snippet Option (i.e., “Link Text To Library”, “Copy From Text Library” or “Ad Hoc”)
      2. Click the “Text Snippet Usage Report” link at upper-right of the tab to view the that report, with the “Complex”, “Text Library Name” and “Account Period” search criteria fields pre-populated accordingly.
      3. For text snippets of type “Link Text To Library”, click the “Edit Snippet in Library” link at upper-right of the tab to open the linked snippet on the “Text Libraries” page.

      4. For text snippets of type “Copy From Text Library” or “Ad Hoc”, edit snippet content directly in the editing pane of the “Project” page.

         Only users that belong to the production team assigned to the selected component (or chapter, if the assignment is “<Use Chapter Assignment>”) can edit the text for the component.

      5. For text snippets of type “Link Text To Library”, click the “Unlink Component” button at lower-left of the tab to disconnect the snippet from its source.

         When a text snippet is in an unlinked state it can be edited within the project, without any of the changes affecting the associated snippet in the text library.

         You must be assigned the “Unlink Text Snippets” user right to click the “Unlink Component” button for this component type. The button is disabled if you are not assigned the right.

         You can reestablish the direct relationship of an unlinked snippet in a project to its counterpart in the text library at any time by clicking the “Link Component” button.

         • When you take this action, the content of the snippet in the text library will overwrite any and all manual edits that may have been made to the snippet in the project.
         • You must be assigned the “Link Text Snippets” user right to click the “Link Component” button for this component type. The button is disabled if you are not assigned the right.
      6. Click the “Description” link at upper-right of the tab to view the “Description” value specified for the snippet via the “Text Libraries” page.
   5. Portfolio Statement

      • If a “Portfolio Statement Template” value of “[none]” is specified for a given statement item in the project’s associated template, the item’s caption text displays in red in the project structure pane. When the item is selected, a clickable link displays in the “Components” tab. When clicked, the link takes you directly to the “Project Templates” page, where you can specify a statement template.

      • Any component with imported language content is automatically unlinked.

      If a “Portfolio Statement Template” value of “[none]” is specified for a given statement item in the project’s associated template, the item’s caption text displays in red in the project structure pane. When the item is selected, a clickable link displays in the “Components” tab. When clicked, the link takes you directly to the “Project Templates” page, where you can specify a statement template.

      1. The following information displays on the tab:

         • Portfolio Statement
         • Template (click the template name link to open the template on the “Portfolio Statement Templates” page)
      2. Click the “Portfolio Statement Template Usage Report” link at upper-right of the tab to open the “Portfolio Statement Template Usage Report” page.
      3. Click the “Output Settings” link at upper-right of the tab to view/edit output settings for the statement on the “Portfolio Statement Template Output Settings” page.

      4. Review the contents of the statement in the grid on the tab.

         1. Double-click any security record in the preview pane to view/edit it in the “Holdings” tab grid of the “Fund Holdings” page.

         • The grid displays values associated with the specified balance type for the account period specified in the “Fund Selection” bar.

           • If the statement points to the “Primary Portfolio Statement” for its calculated values, values are pulled for the same balance type as that specified.
           • The specified balance type does not impact calculation sheets; when referencing values in a calculation sheet item from the portfolio statement, the adjusted value type values are pulled.
         • All categories forming part of a given category exception will display in preview and output according to the output settings specified for that category exception.

         • A legend must be mapped to display in statement preview and output.

           • Abbreviations will be displayed in a legend regardless of whether their symbol or text is mapped in one cell or two.
           • Abbreviations will be suppressed from a legend when the abbreviation symbol or text is mapped and is identified as an exclusion.
           • If footnotes and abbreviations are included in a single legend (i.e., an “intermingled legend”), the footnotes and abbreviations will display in the specified “Auto Symbol Order” for the statement template’s legend (either “By Occurrence in Statement” or “Alphabetical by Footnote[/Abbreviation] Text”).

      5. Click the “Unlink Component” button at lower-left of the tab to disconnect the statement from its source, and then click the “Edit” button to edit the statement values.

         When a statement is in an unlinked state it can be edited within the project, without any of the changes affecting the associated balance set or application libraries.

         You must be assigned the “Unlink Portfolio Tables” user right to click the “Unlink Component” button for this component type. The button is disabled if you are not assigned the right.

         You can reestablish the direct relationship of an unlinked statement in a project to its associated database libraries at any time by clicking the “Link Component” button.

         • When you take this action, the component’s data values are re-calculated from libraries, and will overwrite any and all manual edits that may have been made to the statement in the project.
         • You must be assigned the “Link Portfolio Tables” user right to click the “Link Component” button for this component type. The button is disabled if you are not assigned the right.

      6. Click the “Unlink Footnote Text” button at lower-left of the tab when a footnote-type item is selected in the preview pane to disconnect that footnote’s text from its source, and then click the “Edit” button to edit the text.

         When footnote text is in an unlinked state it can be edited within the project, without any of the changes affecting the associated footnote in the footnote library.

         You must be assigned the “Unlink Footnote Text - Portfolio Statements” user right to click the “Unlink Footnote Text” button for this component type. The button is disabled if you are not assigned the right.

         You can reestablish the direct relationship of unlinked footnote text in a project to its counterpart in the footnote library at any time by clicking the “Link Footnote Text” button.

         • When you take this action, the content of the footnote in the footnote library will overwrite any and all manual edits that may have been made to the footnote in the project.
         • You must be assigned the “Link Footnote Text - Portfolio Statements” user right to click the “Link Footnote Text” button for this component type. The button is disabled if you are not assigned the right.

      7. Click the “Refresh” button at lower-right of the tab to refresh statement preview content to reflect any changes made to either the statement’s associated template or output settings.

         Refreshing the statement content in this manner causes any and all manual adjustments to footing to be reset/cleared.

   6. Financial Statement

      • If a “Financial Statement Template” value of “[none]” is specified for a given statement item in the project’s associated template, the item’s caption text displays in red in the project structure pane. When the item is selected, a clickable link displays in the “Components” tab. When clicked, the link takes you directly to the “Project Templates” page, where you can specify a statement template.

      • Any component with imported language content is automatically unlinked.

      1. The following information displays on the tab:

         • Financial Statement
         • Template (click the template name link to open the template on the “Financial Workbook Templates” page)
         • Financial Workbook (click the workbook name link to open the workbook on the “Financial Workbook” page)
      2. Click the “Financial Statement Template Usage Report” link at upper-right of the tab to open the “Financial Statement Template Usage Report” page.
      3. Click the “Output Settings” link at upper-right of the tab to view/edit output settings for the statement on the “Financial Statement Template Output Settings” page.

      4. Review the contents of the statement in the grid on the tab.

         • The values of financial statement line items are not affected by the specified balance type of the project (when referencing values in a calculation sheet item from the portfolios, the adjusted value type values will be pulled).

         • For spreads, all line items in the statement are displayed in two side-by-side grids, which represent a fund spread (two-facing pages), according to the settings in the “Financial Statement Template Output Settings” page for the specified statement template.

           • Any financial workbook values (i.e., calculation sheet and trial balance items) will be evaluated using the class in context for the statement row or column in which it is displayed.
           • Use the navigation controls beneath the statement grids to view the various page sets of the statement.

      5. Click the “Unlink Component” button at lower-left of the tab to disconnect the statement from its source, and then click the “Edit” button to edit the statement values.

         When a statement is in an unlinked state it can be edited within the project, without any of the changes affecting the associated balance set or application libraries.

         You must be assigned the “Unlink Financial Tables” user right to click the “Unlink Component” button for this component type. The button is disabled if you are not assigned the right.

         You can reestablish the direct relationship of an unlinked statement in a project to its associated database libraries at any time by clicking the “Link Component” button.

         • When you take this action, the component’s data values are re-calculated from libraries, and will overwrite any and all manual edits that may have been made to the statement in the project.
         • You must be assigned the “Link Financial Tables” user right to click the “Link Component” button for this component type. The button is disabled if you are not assigned the right.

      6. Click the “Unlink Footnote Text” button at lower-left of the tab when a footnote-type item is selected in the preview pane to disconnect that footnote’s text from its source, and then click the “Edit” button to edit the text.

         When footnote text is in an unlinked state it can be edited within the project, without any of the changes affecting the associated footnote in the footnote library.

         You must be assigned the “Unlink Footnote Text - Financial Statements” user right to click the “Unlink Footnote Text” button for this component type. The button is disabled if you are not assigned the right.

         You can reestablish the direct relationship of unlinked footnote text in a project to its counterpart in the footnote library at any time by clicking the “Link Footnote Text” button.

         • When you take this action, the content of the footnote in the footnote library will overwrite any and all manual edits that may have been made to the footnote in the project.
         • You must be assigned the “Link Footnote Text - Financial Statements” user right to click the “Link Footnote Text” button for this component type. The button is disabled if you are not assigned the right.
      7. Click the “Refresh” button at lower-right of the tab to refresh statement preview content to reflect any changes made to either the statement’s associated template or output settings.
   7. Image

      If an “Image Library” or “Image Library Item” value of “[none]” is specified for a given image in the project’s associated template, the item’s caption text displays in red in the project structure pane. When the item is selected, a clickable link displays in the “Components” tab. When clicked, the link takes you directly to the “Project Templates” page, where you can specify a statement template.

      1. You can see a preview of the image associated with the component on the tab.

         • If no image has been uploaded to the database in association with the selected component for the specified account period, nothing will be displayed in the preview pane.

         • If an image has been uploaded to the database in association with the selected component for the specified account period, but it cannot be displayed in the preview pane due to its file type, the text “Image Preview Unavailable” is displayed in the preview pane.

           • The following file types are currently available for preview:

             • JPG
             • JPEG
             • PNG
   8. Chart

      • If you add a “Chart” item () to a chapter or section, Arc Suite automatically creates a chart from the data you provide for the associated chart template. Arc Suite returns a JPG preview of the chart on the “Project” page. An EPS image of the chart is also generated and is inserted into project output. Arc Suite supports previewing chart data for portfolio statements, financial statements and tabular data.

      • If a “Chart Template” value of “[none]” is specified for a given chart in the project’s associated template, the item’s caption text displays in red in the project structure pane. When the item is selected, a clickable link displays in the “Components” tab. When clicked, the link takes you directly to the “Project Templates” page, where you can specify a statement template.

      1. The following information displays on the tab:

         • Chart
         • Template (click the template name link to open the template on the “Chart Templates” page)
      2. You can see a preview of the chart associated with the component on the tab.
      3. For charts whose template’s data source type is set to “External Source Data”, click the “button” button at lower-left of the tab to edit the data values.

      4. For charts whose template’s data source type is set to “Financial Statement Template”, “Portfolio Statement Template” or “Tabular Data Template”, click the “Unlink Component” button at lower-left of the tab to disconnect the chart from its source, and then click the “Edit” button to edit the data values.

         When a chart is in an unlinked state it can be edited within the project, without any of the changes affecting the formerly associated source template.

         You must be assigned the “Unlink Charts” user right to click the “Unlink Component” button for this component type. The button is disabled if you are not assigned the right.

         You can reestablish the direct relationship of an unlinked chart in a project to its associated source template at any time by clicking the “Link Component” button.

         • When you take this action, the chart’s data values are drawn from the associated source template, and will overwrite any and all manual edits that may have been made to the chart in the project.
         • You must be assigned the “Link Charts” user right to click the “Link Component” button for this component type. The button is disabled if you are not assigned the right.
      5. Click the “Refresh” button at lower-right of the tab to refresh chart preview content to reflect any changes made to the chart’s associated template.
   9. Tabular Data

      • If a “Tabular Data Template” value of “[none]” is specified for a given table in the project’s associated template, the item’s caption text displays in red in the project structure pane. When the item is selected, a clickable link displays in the “Components” tab. When clicked, the link takes you directly to the “Project Templates” page, where you can specify a statement template.

      • Any component with imported language content is automatically unlinked.

      If a “Tabular Data Template” value of “[none]” is specified for a given table in the project’s associated template, the item’s caption text displays in red in the project structure pane. When the item is selected, a clickable link displays in the “Components” tab. When clicked, the link takes you directly to the “Project Templates” page, where you can specify a statement template.

      1. The following information displays on the tab:

         • Tabular Data (name of the table)
         • Template (click the template name link to open the template on the “Tabular Data Templates” page)
      2. Click the “Tabular Data Template Usage Report” link at upper-right of the tab to open the “Tabular Data Template Usage Report” page.
      3. Click the “Output Settings” link at upper-right of the tab to view/edit output settings for the table on the “Tabular Data Templates Output Settings” page.
      4. Review the layout and contents of the table in the grid on the tab.

      5. Click the “Unlink Component” button at lower-left of the tab to disconnect the table from its source, and then click the “Edit” button to edit the data values.

         When a tabular data table is in an unlinked state it can be edited within the project, without any of the changes affecting the formerly associated source template.

         You must be assigned the “Unlink Tabular Data Tables” user right to click the “Unlink Component” button for this component type. The button is disabled if you are not assigned the right.

         You can reestablish the direct relationship of an unlinked tabular data table in a project to its associated source template at any time by clicking the “Link Component” button.

         • When you take this action, the table’s data values are drawn from the associated source template, and will overwrite any and all manual edits that may have been made to the table in the project.
         • You must be assigned the “Link Tabular Data Tables” user right to click the “Link Component” button for this component type. The button is disabled if you are not assigned the right.
      6. Click the “Refresh” button at lower-right of the tab to refresh tabular data preview content to reflect any changes made to either the table’s associated template or output settings.
   10. External Document

       1. The following information displays on the tab:

          • Current Document Version
          • External Document (displays the “Item Name” value specified via the “Document Structure Templates” page)
          • Document (displays the name of the specified external PDF document)
       2. Click the “Browse” button at right of the “Document” field to select a PDF document from your local or network drive to upload to Arc Suite.

       3. Populate the “Table of Contents Description” field with the text that should display in the Table of Contents of the generated project output PDF, if needed.

          The default value in the text box is the “Item Name” value specified via the “Document Structure Templates” page.

       • When you render project output, the most recent version of the PDF uploaded to the project is included.
       • If the “EDGAR (HTML)” output document type is selected for project output and one or more placeholders for external PDF documents are attached to the project, a tag is inserted in the output that causes the SEC XML schema validation to fail. This is an alert that the EDGAR file needs to be updated with additional information.
   11. Shared Legend

       If a “Shared Legend Template” value of “[none]” is specified for a given legend in the project’s associated template, the item’s caption text displays in red in the project structure pane. When the item is selected, a clickable link displays in the “Components” tab. When clicked, the link takes you directly to the “Project Templates” page, where you can specify a statement template.

       1. The following information displays on the tab:

          • Shared Legend (name of the shared legend)
          • Template (click the template name link to open the template on the “Shared Legend Templates” page)
       2. Click the “Output Settings” link at upper-right of the tab to view/edit output settings for the legend on the “Shared Legend Template Output Settings” page.

       3. Review the contents of the legend in the grid on the tab.

          • A legend must be mapped to display in statement preview/output.

            • Abbreviations will be suppressed from a legend when the abbreviation symbol or text is mapped and is identified as an exclusion.
            • If footnotes and abbreviations are included in a single legend (i.e., an “intermingled legend”), the footnotes and abbreviations will display in the specified “Auto Symbol Order” for the shared legend template (either “By Occurrence in Statement” or “Alphabetical by Footnote[/Abbreviation] Text”).

            • During statement preview/output, the system will check that all footnotes have content for the account period being previewed/output and respond according to specific logic.

              • If content exists for the period, the footnote will display that content.

              • If no content exists for the period, the text associated with the most recent account period will be rolled forward to the period being previewed/output and will display.

                • The footnote text will always populate/display, unless no content has ever been provided in the footnote library for the footnote.

              • The content of a given footnote associated with the period and language being output will display.

                • If the footnote is also designated as having fund-specific content, the content associated with the first fund in the sequence will display.

                  Only the footnote text is fund-specific; the footnote symbol will display the same for any fund.

       4. Click the “Unlink Footnote Text” button at lower-left of the tab when a footnote-type item is selected in the preview pane to disconnect that footnote’s text from its source, and then click the “Edit” button to edit the text.

          When footnote text is in an unlinked state it can be edited within the project, without any of the changes affecting the associated footnote in the footnote library.

          You must be assigned the “Unlink Footnote Text - Shared Legends” user right to click the “Unlink Footnote Text” button for this component type. The button is disabled if you are not assigned the right.

          You can reestablish the direct relationship of unlinked footnote text in a project to its counterpart in the footnote library at any time by clicking the “Link Footnote Text” button.

          • When you take this action, the content of the footnote in the footnote library will overwrite any and all manual edits that may have been made to the footnote in the project.
          • You must be assigned the “Link Footnote Text - Shared Legends” user right to click the “Link Footnote Text” button for this component type. The button is disabled if you are not assigned the right.
       5. Click the “Refresh” button at lower-right of the tab to cause all portfolio statements participating in the shared legend to be regenerated, and to refresh legend preview content to reflect any changes made to either the statement’s associated template or output settings.

5. Click the “Supporting Schedules” tab to see a summary of proofs associated with the fund(s) in the project.

   1. Click the “View Proofs” link at upper-right of the tab to view details of the proof(s) via the “Proofing” tab of the “Financial Workbook” page.

6. Click the “Supporting Documents” tab to view or edit any supporting documents associated with the project.

   • All supporting documents are associated with a specific account period and project; the documents will not carry forward to future reporting cycles.
   • Supporting documents can be associated with the entire project or with a specific project chapter.

7. Click the “Production Procedures” tab to view or edit any production procedures associated with the project.

   • All production procedures are associated with a project’s template (not the project itself); adding documents to a project causes them to be added to all projects based on the template, and the documents will also carry forward to future reporting cycles.
   • Production procedures can be associated with the entire project or with a specific project chapter.
   • Production procedures can also be associated with a specific account period type (i.e., “Annual”, “Semi-Annual”, “Quarterly” or “Monthly”).
8. Click the “Output Management” tab to generate output in one or more media types and/or to view revisions (previously-generated output) for the project.

9. Click the “Administration” tab to view information for the various components that make up your project, as well as the project status.

   1. Click the “Synchronize” button at lower-right of the tab to re-sync a project that is out of sync with its template.

      • Once a project component is modified via the “Project” page, the project is considered “Disconnected” from the project template, and cannot receive any changes made to that template. Clicking the “Synchronize” button will remove any such changes and the project will be refreshed to reflect the settings of its template.
      • If modifications are made to a project template but not pushed out to the project(s) associated with the template, the project(s) will be “Out of Sync”. Clicking the “button” button for a given project will refresh the project to reflect the settings of its template.

   2. Click a specific component in the “Project Content” tree view at left to view information and settings for the component.

      1. Statement (topmost tree view node)

         1. The following project information displays on the tab:

            • Project Name
            • Balance Type
      2. Chapter

         1. The following chapter information displays on the tab:

            • Chapter Name
            • Chapter Code
            • Chapter Behavior
            • Financial Workbook Name (for chapters defined as “All Funds - Combined”, “All Funds - Single” or “All Funds - Repeat”)
            • Fund Name (for chapters defined as “All Funds - Repeat”)
            • Publishing Template
            • ArcPublishing output capability status and information for the chapter (reflects the state of the “Enable Chapter for Sending” check box and information for the chapter on the “Chapter Detail” sub-tab of the “Project Templates” page)
      3. Section

         1. The following section information displays on the tab:

            • Section Name
            • Section Code
            • Section Behavior
            • Account Period
            • Financial Workbook Name (for sections defined as “All Funds - Combined”, “All Funds - Single” or “All Funds - Repeat”)
            • Fund Name (for sections defined as “All Funds - Repeat”)
            • Page break before section (reflects the state of the “Page break before section” check box on the “Section Detail” sub-tab of the “Project Templates” page)
            • ArcPublishing output information for the section (if the “Enable Chapter for Sending” check box is selected on the “Chapter Detail” sub-tab of the “Project Templates” page)
      4. Text Snippet

         1. The following information displays on the tab:

            • Item Name (text snippet name)
            • Output Style Type
            • Text Snippet Option (i.e., “Link Text To Library”, “Copy From Text Library” or “Ad Hoc”); this value can be edited, but doing so “disconnects” the project from its template
            • Text Snippet Library (only if “Text Snippet Option” is specified as “Link Text To Library”or “Copy From Text Library”); this value can be edited, but doing so “disconnects” the project from its template
            • Text Snippet (only if “Text Snippet Option” is specified as “Link Text To Library”or “Copy From Text Library”); this value can be edited, but doing so “disconnects” the project from its template
            • Language (only if “Multi-Language Behavior” is specified as “One Output Containing Multiple Languages”)
            • ArcPublishing output information for the item (if the “Enable Chapter for Sending” check box is selected on the “Chapter Detail” sub-tab of the “Project Templates” page)
      5. Portfolio Statement

         1. The following information displays on the tab:

            • Item Name (portfolio statement name)
            • Output Style Type
            • Portfolio Statement (template name); this value can be edited, but doing so “disconnects” the project from its template
            • Language (only if “Multi-Language Behavior” is specified as “One Output Containing Multiple Languages”)
            • ArcPublishing output information for the item (if the “Enable Chapter for Sending” check box is selected on the “Chapter Detail” sub-tab of the “Project Templates” page)
      6. Financial Statement

         1. The following information displays on the tab:

            • Item Name (financial statement name)
            • Output Style Type
            • Financial Statement (template name); this value can be edited, but doing so “disconnects” the project from its template
            • Language (only if “Multi-Language Behavior” is specified as “One Output Containing Multiple Languages”)
            • Funds on left
            • Funds on right
            • Selected fund(s)
            • ArcPublishing output information for the item (if the “Enable Chapter for Sending” check box is selected on the “Chapter Detail” sub-tab of the “Project Templates” page)
      7. Image

         1. The following information displays on the tab:

            • Item Name (image name)
            • Output Style Type
            • Image Library; this value can be edited, but doing so “disconnects” the project from its template
            • Image Library Item; this value can be edited, but doing so “disconnects” the project from its template
            • ArcPublishing output information for the item (if the “Enable Chapter for Sending” check box is selected on the “Chapter Detail” sub-tab of the “Project Templates” page)
      8. Chart

         1. The following information displays on the tab:

            • Item Name (chart name)
            • Output Style Type
            • Chart Template; this value can be edited, but doing so “disconnects” the project from its template
            • ArcPublishing output information for the item (if the “Enable Chapter for Sending” check box is selected on the “Chapter Detail” sub-tab of the “Project Templates” page)
      9. Tabular Data

         1. The following information displays on the tab:

            • Item Name (table name)
            • Output Style Type
            • Tabular Data (template name); this value can be edited, but doing so “disconnects” the project from its template
            • ArcPublishing output information for the item (if the “Enable Chapter for Sending” check box is selected on the “Chapter Detail” sub-tab of the “Project Templates” page)
      10. External Document

          1. The following information displays on the tab:

             • Item Name (external document name)
             • Table of Contents Description
             • ArcPublishing output information for the item (if the “Enable Chapter for Sending” check box is selected on the “Chapter Detail” sub-tab of the “Project Templates” page)
      11. Shared Legend

          1. The following information displays on the tab:

             • Item Name (legend name)
             • Output Style Type
             • Shared Legend Template; this value can be edited, but doing so “disconnects” the project from its template
             • Associated Statements
             • ArcPublishing output information for the item (if the “Enable Chapter for Sending” check box is selected on the “Chapter Detail” sub-tab of the “Project Templates” page)